New Holland T8010 Manual page 579

Hide thumbs Also See for T8010:

Table of Contents

When installing the dust seal make sure the larger lip

(1) is facing outboard.

Hand press the dust seal into place.

Place dust seal installation ring (1) against the seal

(2) and LIGHTLY tap around the ring to set the seal

against the machined surface.

Section 25 - Four-Wheel Drive Front Axle - Chapter 10

Place the hub in a suitable vise.

Thoroughly clean and dry the seal counterbore.

Apply a thin bead of Loctite® 680 to the seal

counterbore.

Chapters

Table of Contents

T8020 T8030 T8040