New Holland T8010 Manual page 521

REMOVAL OF THE FRONT DIFFERENTIAL CARRIER ASSEMBLY
NOTE: Before starting service work, park the tractor
on level ground, stop the engine and remove the key.
Put blocks in front and behind the rear wheels.
STEP 1
Remove the left hand and right hand axle shafts.
(Refer to information in the FWD Planetary Hub,
Steering Knuckle and Axle Drive Shaft Section of this
Service Manual.)
STEP 2
Remove the front axle from the tractor.
NOTE: Do not alter the tie rod adjustment.
STEP 3
Remove the differential lock supply and return hoses
and remove the fittings (1) from the differential
carrier.
Rem ove the bolts and washer s that hold the
differential carrier to the axle housing (21 mm
socket).
Section 25 - Four-Wheel Drive Front Axle - Chapter 9
1
RD02K001
RD02K002
STEP 4
Support the differential carrier with a chain or lift
strap and hoist. Carefully pry the differential carrier
from the axle housing. When lifting the carrier
assembly out of the axle assembly, make certain the
carrier does not hit the axle housing.
STEP 5
Remove the differential carrier from the axle housing
and mount it in a suitable holding fixture.
25-9-4
RR98K029