New Holland T8010 Manual page 358

Hide thumbs Also See for T8010:

Table of Contents

Remove the position sensor bracket.

Remove the split ring washer. Remove the tie rod

through the opposite end from which the washer and

retainer were removed. If tires are on tractor, the tie

rod may be disassembled by sliding tie rod through

the chain suppor t hole in the disc. Position the

wheels as necessary.

Remove the split ring retainers from both ends of the

Section 21 - Transmission, Drivelines - Chapter 8

Use a long piece of wood to reach through the

rockshaft and contact the rocker pin. Tap the piece of

wood to dislodge the rockshaft pin. Use care not to

damage the seal or bushing.

Remove the rockshaft pin.

Chapters

Table of Contents

T8020 T8030 T8040