New Holland T8010 Manual page 295

Hide thumbs Also See for T8010:

Table of Contents

Install the clutch piston into the carrier. The flat side

of the piston must be down. Push the piston into the

carrier by hand.

1. TEFLON RING

Install two new seal rings in each groove on the hub

of the gear.

Section 21 - Transmission, Drivelines - Chapter 6

2. CAST IRON RINGS

Install the reaction plate (thicker separator plate).

Install a new friction plate.

NOTE: Dip all friction plates in clean transmission

Chapters

Table of Contents

T8020 T8030 T8040