Disassembling the Speed Output Shaft
STEP 141
Remove the four seal rings.
STEP 142
Use a bearing puller to remove the front bearing
cone and the reverse driven gear from the shaft.
STEP 143
Remove the two bearing thrust washers and the
needle thrust bearing.
Section 21 - Transmission, Drivelines - Chapter 4
T95386
T95387
T95389
21-4-43
STEP 144
Remove the reverse driven gear.
STEP 145
Remove the caged needle bearing and nylon spacer.
STEP 146
Remove the two bearing thrust washers and the
needle thrust bearing.
T95391
A11638
A11555