New Holland T8010 Manual page 573

Hide thumbs Also See for T8010:

Table of Contents

Install the retaining plate with four bolts. Torque bolts

to 110 to 125 Nm (82 to 92 lb. ft.)

Install the spacers (1).

Install the spanner plate. Rotate the hub several

times in both directions to set the bearings.

Section 25 - Four-Wheel Drive Front Axle - Chapter 10

The rolling torque reading should be 11.4 to 16 Nm

(100 to 140 lb. in.). If required, add shims to

decrease the torque value, or subtract shims to

increase the torque value.

Once the rolling torque has be established, remove

the spanner plate.

Remove the retaining plate and shim pack.

Chapters

Table of Contents

T8020 T8030 T8040