New Holland T8010 Manual page 722

Hide thumbs Also See for T8010:

Table of Contents

Install the return spring (5) into the spool (4) and

install the spool into the sleeve (3). Lubricate the

valve bore and sleeve seal and install the sleeve into

the valve body. Install the feathering spring (2) into

the poppet (1) and install the poppet into the spool.

repeat for the second spool.

Install a new brake valve gasket.

Install new poppet shaft seals.

Section 33 - Brakes - Chapter 1

Install the firewall brake plate onto the brake body.

Install the three retaining scews and torque to 35-40

Nm (26 to 30 lb. ft.).

Chapters

Table of Contents

T8020 T8030 T8040