New Holland T8010 Manual page 75

Hide thumbs Also See for T8010:

Table of Contents

Remove the lower hydraulic oil cooler tube clamp (1)

and tube (2). Discard the O-ring. Have a container

ready to catch any hydraulic oil that may be in the

tube and cooler.

Remove the four cooling assembly mounting bolts

Properly support the cooling assembly.

Section 10 - Engine - Chapter 4

Slowly raise the cooling assembly and pull the lower

portion away from the cooling fan (1) to clear the fan

NOTE: Fan blades (1) may have to be moved slightly

so that they clear the fan shroud.

IMPORTANT: DO NOT bend the fan blades too far

as damage to the fan may occur.

Move the cooling assembly out far enough to gain

excess to the radiator drain hose (1). Remove the

hose. Remove the assembly from the frame.

Chapters

Table of Contents

T8020 T8030 T8040