New Holland T8010 Manual page 553

Hide thumbs Also See for T8010:

Table of Contents

Use a driver to remove the inner planetary hub

bearing cup.

Use a driver to remove the outer planetary hub

bearing cup.

Section 25 - Four-Wheel Drive Front Axle - Chapter 10

Remove the wire retaining ring (3) and remove the

Place the planetary gear hub in a press. Use the

proper step plate adapter to remove the outer

planetary hub bearing from the planetary gear hub.

Repeat the preceding procedure for the opposite

planetary hub, if necessary.

Chapters

Table of Contents

T8020 T8030 T8040