Removal
STEP 1
2
1
The charge pump (1), is mounted to the hydraulic
pump dr ive (2), on the r ight-hand side of the
transmission. The hydraulic pump drive (2), the
hydraulic piston pump (3), and the filter head (4), do
not need to be removed to remove the charge pump.
NOTE: Provide open access to the charge pump by
blocking the front wheels and properly supporting the
rear axle. Loosen the six rear wheel bushing bolts
and move the wheel outward on the axle.
STEP 2
1
2
Remove the cover plate and two bolts from the
charge pump flange. Remove the O-ring (1) from the
flange. Remove the two suction hose flange bolts (2)
from the suction screen housing on the transmission.
Section 35 - Hydraulic Systems, 3PT - Chapter 7
CHARGE PUMP
4
3
RD02D002
RD02D006
35-7-3
STEP 3
1
Remove the charge pump outlet hose (1) to the filter
head. Remove the outlet line to the priority valve (2).
Remove the connector from the hydraulic filter
pressure sender (3). Remove the two charge pump
to hydraulic pump drive mounting bolts and remove
the charge pump. Remove the O-ring from the
suction hose flange (4).
2
3
4
RD02D009