New Holland T8010 Manual page 197

Hide thumbs Also See for T8010:

Table of Contents

Install a new seal ring on the (2nd-4th-6th) speed

drive gear at location shown by arrow. Align the

friction plate teeth. Install the gear into the clutch

pack. The splined hub of the gear must be facing

Slight oscillation of the gear will help with the

installation. The splined hub of the gear must

engage all the friction plates.

Section 21 - Transmission, Drivelines - Chapter 4

Install a caged needle bearing into the gear hub.

Install a spacer into the gear hub.

Install another caged needle bearing into the gear

NOTE: The top of the second needle bearing cage

will be aligned with the top of the gear hub when all

the friction plates are engaged with the splined hub

of the gear.

Chapters

Table of Contents

T8020 T8030 T8040