New Holland T8010 Manual page 270

STEP 46
Install the compression sleeve with the notch
CAS1903-3 to remove the retaining ring for the piston
return Belleville springs.
STEP 47
Use a press to compress the Belleville springs. Move
the snap ring out of the groove in the shaft.
STEP 48
Remove the compression sleeve and the snap ring.
Section 21 - Transmission, Drivelines - Chapter 6
A10882
A10881
T95713
21-6-17
STEP 49
Remove one piston return Belleville spring.
STEP 50
Remove the lube management ring.
STEP 51
Remove eight piston return Belleville springs.
NOTE: Mark the orientation of the Belleville springs
and lube management ring for proper reinstallation.
RD05K110
RD05K109
RD05K108