New Holland T8010 Manual page 638

Hide thumbs Also See for T8010:

Table of Contents

Install the retaining ring in the groove of the sun gear

Press the bushing (1) onto the axle shaft with 89 000

N (20 000 lb.) force so that it is seated tightly on the

Section 27 - Rear Axle - Chapter 1

Lubricate a new O-ring (1) with transmission fluid or

petroleum jelly and install in the groove of the axle

bushing (2).

4-Inch Heavy Duty Axle

Press the axle bushing (1) onto the axle shaft with

222 500 N (50,000 lb.) force so that it is seated tightly

on the shoulder. Lubricate a new O-ring (2) with

transmission fluid or petroleum jelly and install in the

groove chamfer of the axle bushing.

Chapters

Table of Contents

T8020 T8030 T8040