Disassembling the Speed Input Shaft
STEP 62
Remove the five seal rings from the speed input
shaft.
STEP 63
Use a bearing puller to remove the rear bearing
cone.
STEP 64
Remove the spacer.
Section 21 - Transmission, Drivelines - Chapter 4
T95300a
T95301a
T95303a
21-4-24
STEP 65
Remove the two snap rings.
STEP 66
Remove the spacer.
STEP 67
Remove the two bearing thrust washers and the
needle thrust bearing.
T95305a
T95306a
T95307a