New Holland T8010 Manual page 402

Hide thumbs Also See for T8010:

Table of Contents

If necessary, adjust shim pack to obtain correct end

play as follows:

1. Rotate and push down the drive gear shaft.

2. Install a dial indicator on the bearing cage and

indicate to the end of the drive gear shaft.

3. Set the dial face to zero.

4. Move the drive gear shaft in and out of the

housing as you observe the dial indicator. End

play must be 0.025 to 0.1 mm (0.001 to 0.004

If needed, adjust the shim pack to get the correct end

Section 21 - Transmission, Drivelines - Chapter 9

Chapters

Table of Contents

T8020 T8030 T8040