STEP 235
Install the remaining six new friction plates and five
separator plates, alternating the plates.
STEP 236
Install the reaction plate (thicker separator plate) over
the gear.
Section 21 - Transmission, Drivelines - Chapter 4
T95419
T95420
21-4-65
STEP 237
Install the teflon and O-rings as follows:
1. Hit the clutch carrier against a wood block to
remove the clutch pistons.
2. Replace the teflon ring and O-ring on the carrier
and piston.
3. Install the O-ring in the groove.
4. Install the teflon ring over the O-ring.
STEP 238
Apply petroleum jelly to the teflon rings and install the
5th clutch piston into the carrier.
T95337
40-35
A11609