New Holland T8010 Manual page 341

Hide thumbs Also See for T8010:

Table of Contents

NOTE: Disassembly of range valve shown. Other

valves are similar.

NOTE: Only the speed control valve is equipped with

a pressure sensor. See Figure 1 - Transmission

Control Valve with Four Solenoids for pressure

sensor location.

Place the valve on a clean surface.

Remove the park lock solenoid nut and coil and

cartridge. Remove and discard the O-rings.

Section 21 - Transmission, Drivelines - Chapter 7

Remove the solenoid cover plate. Remove the

solenoid assembly and discard the O-rings.

Repeat for the remaining solenoids.

Chapters

Table of Contents

T8020 T8030 T8040