New Holland T8010 Manual page 160

STEP 19
Remove the rear handler and front splitting stand.
STEP 20
Install the plugs for range, speed, and final drive
transmission housings.
Section 21 - Transmission, Drivelines - Chapter 3
RD02C164
RD02C163
91S17
STEP 21
Complete installation as follows:
1. Install the MFD driveshaft. See MFD Driveshaft
information.
2. Install the fuel tanks. See Fuel Tank Removal
and Installation information.
3. Install the cab. See Cab Raise/Removal and
Installation information.
4. Install the hood. See Hood Removal information.
5. Install transmission fluid.
6. Install transmission fluid.
7. Remove the blocks from the wheels.
STEP 22
When tractor assembly is complete, run the tractor
and check for hydraulic leaks.
Check the fluid level in the transmission and add as
required.
9
96R28A