Disassembly Of The Range Transmission Input Shaft - New Holland T8010 Manual

Hide thumbs Also See for T8010:

Table of Contents

Disassembly of the Range Transmission Input Shaft

Put the input shaft on a clean work bench. Remove

the four seal rings on the front of the shaft (1).

Use a puller to remove the low range drive gear and

front bearing cone.

Section 21 - Transmission, Drivelines - Chapter 6

Use a puller to remove the medium range clutch pack

Remove the snap ring from the clutch pack assembly.

Turn the assembly over and remove the friction,

separator, and backing plates.

Table of Contents

T8020 T8030 T8040