New Holland T8010 Manual page 651

Hide thumbs Also See for T8010:

Table of Contents

Fill the inner two grooves of the axle seal approximately

half full with 251H EP Lithium grease (1).

Section 27 - Rear Axle - Chapter 1

Apply Loctite 515 gasket eliminator to the OD of the

Start the axle seal over the axle and into the axle

housing. The edge of the seal must be flush with the

axle housing.

IMPORTANT: Place a flat bar (not shown) between

the drive and seal to install the seal flush with the

axle housing.

Chapters

Table of Contents

T8020 T8030 T8040