STEP 17
Remove the load check valve. Remove the plunger
from the bore. Check for wear or damage. The
plunger must move freely within the bore.
Section 35 - Hydraulic Systems, 3PT - Chapter 4
RD02E057
35-4-8
STEP 18
1
5
3
5
Remove the cap (1) from the load check body (2).
There will be a light load from the spring (3). Make
sure the stem (4) on the main poppet (5) is in place.
Inspect the poppet and poppet seat for wear or
damage.
2
RD98K201
4
RD98K202