New Holland T8010 Manual page 377

Hide thumbs Also See for T8010:

Table of Contents

Install the needle bearing spacers in the gears on top

of the needle bearings.

Install the two pinion gears for the long shaft into the

housing against the thrust washers.

Install the long spacer into the housing cavity.

Section 21 - Transmission, Drivelines - Chapter 8

Install the long pinion shaft into the housing bore

without locking bolts holes and through the long

Install the remaining two thrust washers into the

housing so that the washer tabs enter the cavities in

the housing.

Install the two remaining pinon gears into the housing

against the thrust washers.

Chapters

Table of Contents

T8020 T8030 T8040