STEP 22
NOTE: If only the FWD/Emergency Brake Assembly
needs to be removed, the range input and counter
shafts DO NOT have to be removed.
Remove the countershaft as follows:
1. Move the input shaft over to the side for
clearance.
2. A threaded rod with a washer slightly larger than
the countershaft diameter may be used to lift the
shaft assembly.
3. Use a hoist to remove the countershaft.
Section 21 - Transmission, Drivelines - Chapter 6
A22319
21-6-9
STEP 23
Remove the input shaft.
A22321