New Holland T8010 Manual page 125

Section 21 - Transmission, Drivelines - Chapter 1
POWER FLOW (FORWARD CREEPER DRIVE SPEEDS)
THIRD CREEP GEAR - As the operator selects third-creep speed, he simultaneously disengages the third-speed
clutch and engages the fifth-speed clutch. Power then flows from the speed transmission input shaft through the
creep-speed clutch on the countershaft, to the fifth-speed clutch, across the output shaft to the master clutch.
Power flow through the range transmission is the same for speeds first creep through third creep.
FOURTH CREEP GEAR - As the operator selects fourth-creep speed, he simultaneously disengages the fifth-
speed clutch and the low-range clutch, and engages the first speed clutch and the medium-range clutch. Power
then flows from the speed transmission input shaft through the creep speed clutch on the countershaft, to the first
speed clutch on the output shaft across the master clutch.
With the master clutch engaged, power is transmitted across the range transmission input shaft to the medium-
range clutch. Power then flows to the range countershaft driven gear, across the countershaft, to the constant
mesh gear set. Power flow is delivered to the pinion shaft by this constant mesh gear set in all speeds.
21-1-36