New Holland T8010 Manual page 314

STEP 245
Install the piston.
IMPORTANT: Use care when installing the piston to
prevent damage to the piston and hub seals.
STEP 246
Orientate the Belleville springs the same as for the
FWD assembly and install.
Section 21 - Transmission, Drivelines - Chapter 6
RD05K098
RD05K099
21-6-61
STEP 247
Place the spacer(s) (if required) and retainer ring on
top of the Belleville springs.
IMPORTANT: Belleville springs must be aligned and
centered so that they do not catch on the shaft when
they are compressed.
STEP 248
C o m p r e s s t h e B e l l ev i l l e s p r i n g s u s i n g To o l
380002454 and install the retainer ring.
IMPORTANT: Make sure retainer ring is fully seated
in the ring groove before removing compression tool.
RD05K0101
RD05K102