New Holland T8010 Manual page 804

Flow Compensator Setting
- Increase the engine speed to 2000 RPM.
- Adjust the load valve on the flowmeter to 1000 PSI (69 bar) on the remote manifold gauge.
- Adjust the remote valve variable flow control until the remote flow is approximately one half the maximum flow rate:
Adjust flow to approximately 18 GPM for standard flow pump.
Adjust flow to approximately 26 GPM for high flow pump.
At one half flow rate and a 1000 PSI (69 bar) pressure reading at the remote manifold, the compensator pressure
gauge should read 1365 PSI (94 bar).
Adjust the load sense spool as necessary to attain the 365 PSI (25 bar) differential pressure.
The load sense spool is the lowermost spool in the compensator. See compensator valve inspection in this section.
Section 35 - Hydraulic Systems, 3PT - Chapter 2
35-2-47
RD02D149