New Holland T8010 Manual page 77

Hide thumbs Also See for T8010:

Table of Contents

Install a new gasket and bolt the radiator outlet /

engine inlet pipe to the engine coolant inlet port.

Install the upper radiator hose (1) and tighten the

clamp. Install the air bleed hose and clamp (2).

Section 10 - Engine - Chapter 4

Do the following step if the A/C

condenser was not removed.

Lift the condenser from the padding and place on the

mounting studs (1). Install the locking nuts (2). Do not

over tighten the nuts, allow condenser to swing freely.

Install the locking pin (3).

Install a new O-ring on the A/C dryer inlet hose and

tighten the fitting.

Chapters

Table of Contents

T8020 T8030 T8040