Installing The Range Input Master Clutch - New Holland T8010 Manual

Hide thumbs Also See for T8010:

Table of Contents

Installing the Range Input Master Clutch

Install the snap ring that fastens the master clutch

assembly to the input shaft. Align the clutch to the

input shaft according to the mark made in Step 8.

Install a new seal ring into the hub assembly.

Lubricate the seal ring with petroleum jelly.

Section 21 - Transmission, Drivelines - Chapter 6

Install new seal on the outside of the hub. Lubricate

the seal ring with petroleum jelly. Install the hub

assembly onto the master clutch carrier.

Install a separator plate into the master clutch.

Table of Contents

T8020 T8030 T8040