New Holland T8010 Manual page 359

Hide thumbs Also See for T8010:

Table of Contents

When both rockshaft pins are removed, lift and set

aside the rockshaft casting.

NOTE: Keep bearings and seals free of foreign

Remove the bolts that attach the cover and rear cab

bracket to the rear frame.

Remove the rear frame top cover and set aside.

Section 21 - Transmission, Drivelines - Chapter 8

Remove the differential lock supply line from the

differential.

Remove the rear frame cover and the PTO clutch

assembly. (Refer to PTO Assembly, Single and Dual

Speeds in this manual).

Remove the differential lube line from the rear frame.

NOTE: Bevel pinion must be removed from rear

frame housing before proceeding.

Chapters

Table of Contents

T8020 T8030 T8040