STEP 11
Inspect the brake separator plates. If there is damage
or heavy wear, replace the plates.
STEP 12
Inspect the brake friction plates. If there is damage or
heavy wear (the grooves worn away), replace the
friction plates. The minimum thickness for a friction
plate is 3.45 mm (0.136 inch).
Section 33 - Brakes - Chapter 2
STEP 13
T97970
Use compressed air to push the brake piston out of
the brake cover.
STEP 14
T97969
Carefully remove the piston from the cover. Repeat
procedures for the other piston.
33-2-6
A21050
A21052