STEP 133
Slight oscillation of the gear will help with the
installation. The splined hub of the gear must
engage all the friction plates.
STEP 134
Install a caged needle bearing into the gear hub.
NOTE: The top of the needle bearing cage will be
aligned with the top of the gear hub when all the
friction plates are engaged with the splined hub of
the gear.
Section 21 - Transmission, Drivelines - Chapter 4
T95379
A11546
21-4-40
STEP 135
Install the two bearing thrust washers and the needle
thrust bearing.
NOTE: The needle thrust bearing must be between
the two bearing thrust washers.
STEP 136
Install the first spacer.
STEP 137
Install the two snap rings.
A11547a
A11551A
A11550