New Holland T8010 Manual page 532

Hide thumbs Also See for T8010:

Table of Contents

Install the piston (1) into the cap half of the case (2).

NOTE: Use care when installing the piston to avoid

damaging the seal rings.

Clean the mounting bolts and install Loctite® 242 to

the threads.

Section 25 - Four-Wheel Drive Front Axle - Chapter 9

Align the assembly marks (1), place the flange half

on the clutch carrier, install the mounting bolts and

torque to 60 to 65 Nm (44 to 48 lb. ft.).

Install a new seal.

Install the bearing cup.

Chapters

Table of Contents

T8020 T8030 T8040