New Holland T8010 Manual page 159

STEP 14
4
1
1. ODD EVEN VALVE
RETURN LINE
2. FILTER TEMP SENDING
WIRE
Move the transmission wire harness into position
over the speed transmission housing.
Connect filter temperature sender wire to the
hydraulic filter head. Connect the hydraulic lines to
the filter head.
STEP 15
6
1
2
1. STEERING SENSING
AND SUPPLY LINES
2. REGULATED SUPPLY
JUMPER TUBE
3. MFD/DIFF LOCK SUPPLY
LINE
Connect these lines on the top of the transmission
Section 21 - Transmission, Drivelines - Chapter 3
3
2
RD02C169
3. OIL COOLER SUPPLY
LINE
4. STEERING RETURN LINE
5
4
3
RD02C167
4. REGULATED PRESSURE
SUPPLY LINE
5. OIL COOLER RETURN
LINE
6. PARK LOCK RELEASE
SUPPLY LINE
STEP 16
If equipped, install the true ground speed radar on to
the transmission housing and connect to the wire
harness.
STEP 17
Connect the removed tagged lines. Position the lines
in the retaining bracket and install the clamp bar (1).
STEP 18
Connect the wire harness to the speed powershift
valve solenoids.
8
RD02C168
1
RD02C166
RD02C165