New Holland T8010 Manual page 169

Hide thumbs Also See for T8010:

Table of Contents

Countershaft, Input Shaft, and Output Shaft Removal for Transmissions

without Creep

Remove transmission housing cover as follows:

1. With the transmission housing on the engine

stand, turn the housing so the cover is in the

upright position.

2. Remove the mounting bolts from the front

bearing support.

3. Loosen and raise the transmission housing cover

using prybars under the two lift areas.

Place strap around input shaft. Raise input shaft and

remove countershaft.

Section 21 - Transmission, Drivelines - Chapter 4

Remove output shaft.

Remove input shaft.

Chapters

Table of Contents

T8020 T8030 T8040