New Holland T8010 Manual page 366

Hide thumbs Also See for T8010:

Table of Contents

Press the pinion shaft and bearings out of the

bearing cage.

NOTE: Make sure that the rear bearing (against the

gear) will clear the press.

Press the bearing cone from the pinion shaft.

Remove the front bearing cup from the bearing cage.

Section 21 - Transmission, Drivelines - Chapter 8

Remove the inner snap ring from the bearing cage.

Remove the rear bearing cup from the bearing cage.

Be sure the hole in the button of the pinion shaft is

Chapters

Table of Contents

T8020 T8030 T8040