New Holland T8010 Manual page 582

STEP 137
Apply a light coating of multipurpose grease to the
dust sealing area on the wheel hub
STEP 138
Apply a VERY LIGHT coating of light multipurpose oil
to oil seal sealing area of the steering knuckle, or to
the ID of the hub seal.
Section 25 - Four-Wheel Drive Front Axle - Chapter 10
RD05M033
RD05M034
25-10-37
STEP 139
Install a wheel nut (1) on one of the hub wheel studs
(2) and place a lifting device (3) on the stud. With an
assistant, carefully guide the hub into place on the
steering knuckle. Take care not to damage the seal
or bearing.
STEP 140
4
3
Install a washer (1), driver bearing (2) and nut (3).
1
2
3
RD05M035
1
2
RD05M039