New Holland T8010 Manual page 562

Hide thumbs Also See for T8010:

Table of Contents

1. AXLE SHAFT

NOTE: Seals are installed at the factory as show

above. Inner seal (3) lip facing toward the differential

and outer seal (4) facing toward the planetary hub.

Section 25 - Four-Wheel Drive Front Axle - Chapter 10

3. INNER OIL SEAL

4. OUTER SEAL

NOTE: Lubricate the inner diameter of the seals with

SAE 85W-140 gear lubricant. Install the axle shaft

seals (1)(2) with the lips facing toward the differential.

The inner seal (1) should be pressed flush with the

bushing (4). The outer seal (2) should be pressed

flush with the casting surface (5).

Apply Loctite ® 515 to the bottom face of axle

housing bore. Install the grease retaining plate so

that the grease cavity is below the bore.

Chapters

Table of Contents

T8020 T8030 T8040