New Holland T8010 Manual page 297

STEP 165
Install the needle thrust bearing and the two bearing
thrust washers. The needle bearing must be between
the two bearing thrust washers.
STEP 166
Install the bearing spacer.
Section 21 - Transmission, Drivelines - Chapter 6
A10942
A10943
21-6-44
STEP 167
Install the front bearing cone so that the larger OD
side of the bearing cone is facing down. Press the
bearing in place to be sure the bearing is properly
seated.
NOTE: Be sure the tool used to press the bearing
does not contact the end of the shaft. Do not press
on the bearing cage.
A10945