New Holland T8010 Manual page 966

Hide thumbs Also See for T8010:

Table of Contents

Be sure the rim surface in the nut area is free of dirt

rust or debris as this will affect the accuracy of future

measurements. Install and tighten the measured

washers and nuts.

Install the two fabricated threaded spacer tubes onto

the rim bolts. Hand tighten firmly against the rim.

Install the fabricated straightedge onto the two

spacer tubes using two M16 bolts.

Section 41 - Steering - Chapter 2

Chapters

Table of Contents

T8020 T8030 T8040