New Holland T8010 Manual page 78

STEP 30
3
Install a new O-ring on the condenser outlet hose
and tighten the fitting (1). Install the fuel cooler outlet
hose (2) and inlet hose (3).
STEP 31
2
Install a new O-ring on the lower hydraulic cooling
line and tighten the fitting (1). Install the support
clamp (2).
STEP 32
Install a new O-ring on the upper hydraulic cooler
hose (1) and tighten the fitting.
Section 10 - Engine - Chapter 4
1
2
RD05N019
1
RD05N025
1
Rd05N016
STEP 33
Install the air cleaner scoop and install new plastic
fasteners (1). Lower fastener not shown.
STEP 34
3
Install hose clamps (1), bracket (2) and mounting
hardware (3).
STEP 35
If required, recharge the A/C system. See A/C
Section in this Service Manual.
10-4-9
1
RD05N015
3
1
1
RD05N014
RD05N012