STEP 111
Install one separator plate in the housing so it locks
on the dowel pins.
STEP 112
Install one friction plate in the housing so it will mesh
with the locking side gear.
STEP 113
Alternate the separator and friction plates until you
have a total of three friction plates and four separator
plates in the housing.
Section 21 - Transmission, Drivelines - Chapter 8
T98151
T98152
T98151
21-8-28
STEP 114
Install the bearing cup into the differential cover until
seated against the cover.
STEP 115
Apply grease to the larger thrust washer and install
the washer on the cover so the tabs enter the cover
cavities.
T98172
88-28A