New Holland T8010 Manual page 73

STEP 5
1
Remove the air scoop upper (shown) (1) and lower
plastic fasteners. Remove the air scoop.
Section 10 - Engine - Chapter 4
Do the following steps if the A/C
condenser does not have to be removed.
STEP 6
RD05N015
Remove the upper hydraulic cooling hose. Discard
the O-ring. Have a container ready to catch any
hydraulic oil that may be in the hose.
STEP 7
Remove the swing latch locking pin (1). Remove the
mounting lock nuts (2).
STEP 8
Place a piece of cardboard or other suitable padding
on top of the air cleaner. Carefully lift the condenser
from its mounting and place it on the padding as
show. Continue with cooling module removal.
10-4-4
2
1
RD05N016
RD05N017
RD05N018