New Holland T8010 Manual page 956

STEP 19
Check the pump bracket to make sure it is not
war ped or bent. Using the marks made during
disassembly, install the pump bracket and isolator on
the steering hand pump.
NOTE: The pump bracket must be squarely aligned
with the housing of the pump. Otherwise, the steering
column may bind and not properly center. If this
happens, the steering wheel will move constantly
back and forth, trying to center.
Section 41 - Steering - Chapter 1
STEP 20
114S26
Tighten the pump bracket bolts evenly in a crossing
pattern to a torque of 32 to 36 Nm (24 to 27 lb. ft.).
Lubricate the internal splines of the steering hand
pump with grease.
41-1-7
114S29