New Holland T8010 Manual page 220

STEP 206
Turn the shaft over and install the first piston return
Belleville washer.
NOTE: The concave side of the washer must be
facing down.
STEP 207
Install the lube management ring.
Section 21 - Transmission, Drivelines - Chapter 4
A11592
Rd05M011
21-4-59
STEP 208
Install the second Belleville washer.
NOTE: The concave side of the washer must be
facing up.
Install the remaining seven Belleville washers,
alternating the position of the washers until the last
washer has the concave side facing down.
STEP 209
1. Install the snap ring over the shaft.
2. Install the Belleville washer compression sleeve
CAS1903-5 over the shaft and on top of the snap
ring.
NOTE: The smaller OD side of the sleeve must be
facing up.
A11593
A11595