STEP 16
Remove the shims for the input shaft bearing cage.
Keep the shims together with the bearing cage. The
shims will be used again during assembly.
STEP 17
Remove the mounting bolts from the countershaft
bearing cage.
STEP 18
Remove the countershaft bearing cage and pump
drive gear assembly.
Section 21 - Transmission, Drivelines - Chapter 6
16S12
16S15
16S18
21-6-8
STEP 19
Remove the shims for the countershaft bearing cage.
Keep the shims together with the bearing cage.
STEP 20
Remove the mounting bolts from the front bearing
support cover.
STEP 21
Remove the front bearing support cover.
16S21
16S24
16S27