STEP 36
Close the radiator drain. Refill the cooling system
with the proper mix of ethylene glycol. See Operator
Manual for coolant capacity. Install the pressure cap
on the deaeration tank, start the engine and check for
any leaks. Turn off key to shut engine off. Repair as
necessary.
STEP 37
Install the left (1) and right side panels. If necessary,
top off coolant in the recovery bottle (2).
Section 10 - Engine - Chapter 4
STEP 38
RD05N013
Remove wheel blocks.
2
1
RD05N011
10-4-10
RD02C070