Remote Valve Signal Check And Hitch Signal Check - New Holland T8010 Manual

REMOTE VALVE SIGNAL CHECK AND HITCH SIGNAL CHECK

Each remote section and the hitch circuit are
equipped with a signal check. If any one signal check
is leaking it will effect the performance of all the other
circuits.
1. SIGNAL CHECK TO PUMP COMPENSATOR
2. SIGNAL CHECK TO PILOT RELIEF
Section 35 - Hydraulic Systems, 3PT - Chapter 5
1
REMOTE VALVE SIGNAL CHECKS
HITCH VALVE SIGNAL CHECK (INTERNAL)
35-5-31
REMOTE SIGNAL CHECK LEAKING: All remaining
remote circuits and hitch are operating at reduced
flow. The leaking remote section operates normally.
HITCH SIGNAL CHECK LEAKING: All remotes
operating at reduced flow. Hitch operates normally.
4
2
RI02F021
3. SIGNAL CHECK POPPET AND SPRING
4. REMOTE VALVE SECTION
3
RD06A065