New Holland T8010 Manual page 329

Hide thumbs Also See for T8010:

Table of Contents

Install a new friction plate into the master clutch.

Install the remaining eight separator plates and eight

friction plates, alternating the plates.

NOTE: Dip all friction plates in clean transmission

fluid before installation.

Install the clutch backing plate.

Install the snap ring into the master clutch carrier.

Section 21 - Transmission, Drivelines - Chapter 6

Install new O-ring on the feeder tubes and lubricate

with petroleum jelly. Install the feeder tubes.

Install a new gasket and install the range shift valve

adapter plate.

Install a new gasket and install the range shift valve.

Chapters

Table of Contents

T8020 T8030 T8040