New Holland T8010 Manual page 51

STEP 73
Properly suppor t the muffler, lift into place and
tighten the mounting bolts to a torque of 200 to 245
Nm (149 to 179 lb.ft.).
STEP 74
1
Install the air cleaner aspirator hose (1). Tighten the
exhaust pipe to turbo clamp (2).
STEP 75
Install the exhaust shield.
STEP 76
Install the cooling module. See Cooling Module
Section in this Repair Manual.
Section 10 - Engine - Chapter 1
RD05N102
2
RD05N101
RD05N100
10-1-16
STEP 77
Recharge the A/C system. See A/C Service Section
in this Repair Manual.
STEP 78
Install the hood. See Hood Removal Section in this
Repair Manual.
STEP 79
Install the positive cable (+). Install the negative cable
(-). Install the battery cover.
NOTE: Install all tie straps that were removed during
disassembly.
STEP 80
Start the engine and check for any leaks. Repair as
necessary. Top off all fluids. Check A/C for proper
operation.
STEP 81
Remove wheel blocks.
RD02E069
RD02C070