New Holland T8010 Manual page 452

STEP 6
Mark the drive shaft to FWD output shaft yolks.
Remove the four drive shaft to transmission yoke
retaining bolts. Remove the drive shaft.
Section 25 - Four-Wheel Drive Front Axle - Chapter 4
RD02H168
STEP 7
3
Place the drive shaft (1) on V blocks (2). Position a
dial indicator (3) over the drive shaft. Turn the drive
s h a f t o n e c o m p l e t e r evo l u t i o n t o c h e c k fo r
straightness. Replace the drive shaft, if necessary.
25-4-5
1
2
RD02H191
2